-
1. Who is Finisar Corporation, and is the FTLF1319P1BTL even still available?
-
2. What does the FTLF1319P1BTL actually cost — and where do hidden costs show up?
-
3. Finisar is part of Coherent now — does that matter for purchasing?
-
4. How do I tell a new module from a refurb?
-
5. How should I actually test the modules once they arrive?
-
6. When something goes wrong, who do I call — is the Finisar phone number still working?
-
7. When would I not recommend Finisar?
If you're sourcing enterprise-grade optical transceivers, odds are these are the questions you actually want answered: Is this module real or refurbished? What is the total cost? Is this a Finisar product or a Coherent one now? And honestly — how do I actually check the thing when it arrives?
I manage procurement at a roughly 400-person network equipment company. Over six years I've handled about $180,000 a year in optical transceiver spend, worked with 8+ vendors, and logged every order in our cost tracking system. What follows are the questions I get asked most often, answered from our internal records — not marketing talking points.
1. Who is Finisar Corporation, and is the FTLF1319P1BTL even still available?
Finisar was spun out of Honeywell's optical interconnect business in 1988 and ended up as one of the earliest makers of optical transceivers. They were also a founding member of the SFP MSA — the specification that literally introduced the name "Small Form-factor Pluggable."
That specific module — FTLF1319P1BTL — is a classic 1000BASE-SX SFP: 850 nm, multimode, typically rated around 550 m. It's a workhorse for enterprise access-layer switches and short-reach data center links. "Available" doesn't mean "easy to find everywhere," though. We buy through authorized distributors with a typical 2–4 week lead time, and lead times can stretch by another two to three weeks in Q4 or when one part number goes hot. Because of that, we add a 15–20% buffer to our quarterly demand before we set SLA targets.
2. What does the FTLF1319P1BTL actually cost — and where do hidden costs show up?
Starting with list pricing, as of January 2025. New-in-box FTLF1319P1BTL modules run roughly $45–70 per unit depending on channel and order quantity. Authorized channels often land near $70; reputable gray channels may show $45–50. Don't stop at the unit price — our first year of buying on price alone taught us that lesson hard.
The hidden costs tend to cluster in a few places:
- MOQ: cheap channels often require a 50- or 100-unit minimum, which ties up working capital in inventory.
- Freight and duties: international orders add freight plus duty in the 3%–15% range, adding 8%–20% to the landed cost.
- No serial-number traceability: if a module fails without a serial record, RMA can require shipping back the entire batch — a massive time cost.
- "Configuration included" add-ons: one quote we got added a $500 pre-configuration fee. Our team typed the same commands into a switch in a few minutes.
When I calculate TCO, I fold in unit price, freight, duties, expected RMA risk, and a risk contingency for "whole batch fails." That last line alone often exceeds the $10 difference between cheap and authorized channels.
3. Finisar is part of Coherent now — does that matter for purchasing?
Yes, more than many buyers expect. II-VI announced the Finisar acquisition in 2019, but the deal only closed in September 2022 after SAMR's antitrust review in China. II-VI had already renamed the parent company to Coherent Corp in July 2022 — reusing the name of the original Coherent laser company that II-VI also owned.
For procurement, that means three practical things:
- Invoices and RMA flow under Coherent. Proforma invoices, shipping docs, and RMA slips often list Coherent instead of Finisar Corp now. That once cost us a customs discrepancy, so we add a clear note to import paperwork.
- Part-number migration: some legacy part numbers are kept, others are gradually moving to Coherent labels. Specs are compatible, but the number ranges differ — read carefully whether you're quoting "Finisar legacy" or "Coherent new."
- Secondary-market "Finisar genuine" claims get riskier. Because of the brand consolidation, resellers sometimes relabel Coherent stock as Finisar. That's not fake product, but it also isn't the "Finisar-labelled original" your acceptance form expects — and it does bite during QA.
4. How do I tell a new module from a refurb?
Honestly, visual inspection is getting harder every year. In 2023 we received a batch sold as "brand new" — after plugging in, the DOM data showed 4,700 cumulative operating hours. That's not a new module. Since then we've built three fixed checkpoints.
- Label layer: original Finisar labels have specific ink colors and edge sharpness. Refurbs often reprint labels — the type looks heavier or the color reads gray. Not reliable on its own, but it is a first filter.
- EEPROM read: pull DOM data with the switch CLI or a small i2c utility — vendor name, part number, serial, plus the real-time diagnostics in page 0xA2. Refurb units frequently have generic vendor fields or an off-format serial number.
- Packaging and lot continuity: original ESD bags and tray inserts carry a barcode, and modules from the same lot should have sequential or clustered serials. Loose parts, missing serials, or ten units from one "batch" with wildly spaced serials — red flag.
Most reliable path is still an authorized channel. That's also where the price is. Our current policy: core-link modules through authorized only, edge-link modules through reliable secondary sources with an acceptance test that includes random-destruction sampling.
5. How should I actually test the modules once they arrive?
One clarification first: if you landed here searching "how to test a capacitor with a multimeter" — that's a different job. A multimeter is fine for capacitors, but it can't test an optical transceiver. These modules don't follow a "has voltage = good, no voltage = dead" logic. You need a switch with an optical port and a clean patch cable.
Our acceptance flow looks like this:
- Visual and label match: cross-check part number, serial, and batch against the purchase order.
- Plug-in identification: insert into a matching switch, run
show interfaces transceiver(or the vendor equivalent) and verify serial, vendor ID, wavelength, reach, and optical power readout. Missing fields = stop. - Loopback / pair test: run paired modules against each other for 24 hours of traffic. Out of 200+ modules we've tested, any bad unit fails with CRC errors within the first 30 minutes.
- Thermal soak: run 72 hours in chassis and watch DOM temperature. A small fraction of refurbs climb temperature much faster than normal — that shows up around hour 2–3.
If 48 hours pass clean, I'll call it "fit to deploy." That doesn't mean it will never fail — it means the batch is worth sampling further, not just shipping straight to production.
6. When something goes wrong, who do I call — is the Finisar phone number still working?
The old Finisar support number basically routes into Coherent's support system now. The channels we actually use:
- Coherent's online support portal: RMA tickets and datasheets live here. We prefer this for traceability — every request has a ticket number.
- Regional sales rep: the contact you get through an authorized distributor is far more useful than a 1-800 number. When a batch issue hits, they can push internally.
- Distributor's aftersales line: if you bought from a distributor, RMA goes through them first. Trying to go direct to the factory often gets bounced with "you're not our direct customer."
Our experience: phone is rarely the fastest channel. Email plus ticket number plus distributor sales rep — all at once — usually gets a response in 24–48 hours.
7. When would I not recommend Finisar?
This may not be what a manufacturer wants to hear, but it needs saying: Finisar modules are not the best fit for every scenario. In three cases I'll point you elsewhere first.
Short-term or project-based links. If you're standing up a temporary test network or a few months of project infrastructure, you don't need a module at this tier. Compliant third-party compatible modules can run at roughly 1/3 to 1/2 the price and last months fine — as long as you accept having no original warranty.
Extreme low-budget edge scenarios. For a backup path or a sub-10-meter stacking link inside the rack, compatible modules get the job done. We moved our core links fully to Finisar only after doing the TCO math; our edge links didn't need that upgrade.
Custom or unusual optical specs. That's outside what I'm qualified to judge — I'm not an optical engineer, and wavelength drift analysis isn't my job. In those cases I'd go straight to Coherent's FAE team or a supplier who specializes in custom optics. Don't expect a standard part number to cover it.
I'm not saying Finisar is the wrong buy. I'm saying specialization deserves respect. The vendors who tell me "this scenario is better served by someone else" are exactly the ones I trust with everything else. Six years in, the sales reps I value most are the ones who tell me when not to buy from them.